Norden composite and elastomeric bearing materialsMaterial design, and verification of properties and performance, is at the very core of what we do.
Norden's material portfolio consist of two main types of bearing materials. Our composites have high load carrying capability and excellent friction properties. Our elastomeric materials have very good shock absorption properties and abrasive resistance. Our wide range of materials enable us to give objective performance based advice to our customers. Please refer to the information below regarding our various material grades and applications. For further information and discussions regarding your particulate needs, please do get in touch with us
The measurements after machining: OD 1896 x ID 1760 x 400mm
|
MARITIME products*
Turret bearings Chain guide shoe Offshore cranes & drilling Wear rings and strips MATERIALS Norden 788 Norden 701 Norden 901 Norden 988 Norden AM8 Norden NFF Norden RA5 Norden 605 Norden CM7 Norden CM77 Norden CM10 NORDEN 422 CPR |
Description
Norden 988 is intended for use in exceptionally high loaded bushings and bearings applications. Special components in the material mating surface ensures a very low friction. Composition Norden 988 composite bearing material is produced using a specially manufactured Aramid fabric reinforcement and incorporates a unique low friction bearing surface. The material is impregnated with a thermosetting resin incorporating solid lubricant fillers. Norden 988 has been formulated particularly for dry running high load applications. Norden 988 is dark grey in colour. |
Manufacture
The material is manufactured to a documented formulation and procedure standard. Manufacturing traceability records are kept for the material batch. Certificates Certificates of conformity can be issued to confirm that the material supplied conforms to the grade standard for a particular order. |
Description
Norden AM8 material is intended for use in high load spherical bearing applications. Material Norden AM8 is a high load composite bearing material. The material's unique build up, ensures transfer of lubricant film over the entire contact surface. The composite is made of specially manufactured synthetic fabric reinforcement using a special composite construction process, the material is impregnated with a thermosetting resin and solid lubricant fillers making it suitable for dry running applications. The product is dark grey in colour. |
Manufacture The material is manufactured to documented procedures and standards. Full manufacturing traceability records are kept for the material. Certificates Certificates of conformity can be issued that material supplied conforms to the grade standard for a particular order. |
Description
Norden NNF material is intended for use in medium load bushings and sliding bearing applications. Material Norden NNF is a specially constructed composite bearing material incorporating a needle felt fibre reinforcing which is impregnated with a thermosetting resin. Solid lubricant fillers are added to the resin to lower friction and improve wear resistance. The product is dark grey in colour. |
Manufacture
The material is manufactured to documented procedures and standards. Full manufacturing traceability records are kept for the material. Certificates Certificates of conformity can be issued that material supplied conforms to the grade standard for a particular order. |
Description
Norden RA5 is intended for use in high load bushings and bearings applications. The material offers good friction properties. Material Norden RA5 composite bearing material is made of a specially manufactured synthetic fabric reinforcement. The material is impregnated with a thermosetting resin, with solid lubricant fillers for enhanced dry running capability. Norden RA5 is dark grey in colour. |
Manufacture
The material is manufactured to a documented formulation and procedure standard. Manufacturing traceability records are kept for the material batch. Certificates Certificates of conformity can be issued to confirm that the material supplied conforms to the grade standard for a particular order. |
Description
Norden 605 is especially designed for rudder bearing application. The material incorporates good material and friction properties, and is suitable for dry running at medium loads. Material Norden 605 composite bearing material is made of a specially manufactured synthetic fabric reinforcement. The material is impregnated with a thermosetting resin, with solid lubricant fillers for enhanced dry running capability. Norden 605 is dark grey in colour. |
Manufacture
The material is manufactured to a documented formulation and procedure standard. Manufacturing traceability records are kept for the material batch. Certificates Certificates of conformity can be issued to confirm that the material supplied conforms to the grade standard for a particular order. |
Marcot T200 PXMMarcot T200 PXM is a high load, high temperature fire-retardant composite bearing material manufactured from synthetic fabric reinforcement which is impregnated with a thermosetting phenolic resin.
Solid lubricant fillers are added for reduced friction and improved dry running capability. Marcot T200 PXM does not emit dust in use |
Description
Norden 422CPR material is intended for use in high load bushings and bearings applications, where there is a requirement for high wear resistance. The material can be deliverd as bearings and pads. Material Norden422CPR is a high load composite bearing material manufactured from synthetic fabric reinforcement which is impregnated with a thermosetting resin, solid lubricant fillers are added for reduced friction. Norden 422 CPR is a very durable / wear resistant material. The product is pink red in colour. |
Description
Norden CM7 have been developed for use specifically in water lubricated shaft applications. The material offer good wear life, abrasion resistance and shock load absorption, combined with low coefficient of friction. Material Norden CM7 is a highly developed thermosetting crosslinked polymer that optimizes special characteristics in the design of elastomeric materials. The polymer is a tough material with good load bearing capacity and impact properties. |
Manufacture
The material is manufactured to a documented formulation and procedure standard. Manufacturing traceability records are kept for the material batch. Certificates Certificates of conformity can be issued to confirm that the material supplied conforms to the grade standard for a particular order. |
Description
Norden CM77 have been developed for use specifically in water lubricated shaft applications, operating in particle rich waters. The material offer good wear life, excellent abrasion resistance and shock load absorption. Material Norden CM77 is a highly developed thermosetting crosslinked polymer that optimizes special characteristics in the design of elastomeric materials. The outer polymer, blue in colour, is a tough material with good load bearing capacity and impact properties. The inner polymer, black in colour, is a softer polymer with good flexibility and ability to resist tearing from abrasive particles. |
Manufacture
The material is manufactured to a documented formulation and procedure standard. Manufacturing traceability records are kept for the material batch. Certificates Certificates of conformity can be issued to confirm that the material supplied conforms to the grade standard for a particular order. |
Description
Norden CM10 exhibits excellent low temperature flexibility, good dynamic properties and excellent wear characteristics. The material has a proven track record in hydraulic machinery, as well as forming the inner material component in Norden CM77. Material Norden CM10 Seal is a highly developed thermosetting crosslinked polymer that optimizes special characteristics in the design of elastomeric materials. The material is produced in a range of hardness's, according to the specific application. The material offer good flexibility and ability to resist tearing from abrasive particles. |
Manufacture
The material is manufactured to a documented formulation and procedure standard. Manufacturing traceability records are kept for the material batch. Certificates Certificates of conformity can be issued to confirm that the material supplied conforms to the grade standard for a particular order. |
Norden Copper Materials
Norden Maritim AS represents Europe's biggest producer of copper conductors for electrical equipment
- from the copper bar to the most sophisticated copper component. Total mastery of the copper industrial process. Technical excellence, skill, reliability and flexibility are the four points of commitment running throughout a copper process that brings together raw material, metallurgy, industrial components and distribution. Norden Maritim network complies with the UL and ISO standards, and the RoHS and Reach regulations. Round square hexagonal copper bars
Round copper bars : Diameter from 5 mm up to 85 mm, length up to 6400 mm, tolerance on length : standard 50 mm, shorten 3 mm. Square and hexagonal copper bars : • Square copper bar : from 5 mm up to 70 mm, • Hexagonal copper bar : from 8 mm up to 60 mm Length for both : up to 6400 mm. Tolerance on length : Standard 50 mm - Shorten 3 mm Chemical and mecchanical characteristics for round square and hexagonal bars in accordance with the european standards. Cu-ETP, Cu-FRHC, Cu-OF, CuAg 0,04, CuAg 0,07, CuAg 0,10, CuAg 0,04P, CuAg 0,07P, CuAg 0,10P, CuAg 0,04(OF), CuAg 0,07(OF), CuAg 0,10(OF) Cu-PHC, Cu-HCP Flat Copper bars
Chemical and mechanical characteristics of our copper bars and busbars in accordance with the european standards. Copper bars and busbars sizes: • Width of our copper bar : from 5 mm to 250 mm, Thickness from 1 mm to 70 mm, Cross section up to 7500 mm2, • Length of our copper bar : up to 9500 mm (depending the cross section), with a standard length tolerance of 100 mm. Upon demand this lenght tolerance could be 3 mm. Standard tolerances for straightness and edgewise bow : 1,5 mm/m Plating: Tin plating 1 to 20 microns. |